Welding fume extraction & soldering fume extraction
with the new EVOTEC FEX 1000.1 extraction system
To mark its 40th anniversary EVO-PRODUCTS presents the latest addition to the FEX family:
The FEX 1000.1as compact, powerful extraction systems for various types of welding fume extraction, soldering fume extraction & dust extraction
Options:
- Suction hose connection Ø 50 mm or Ø 80 mm
- Connection option for extraction arm
Intuitive control panel with optimized control software - adaptable to your extraction process
Easily accessible filter chamber with configurable combi filter system -
for user-friendly and low-contamination filter changes
High mobility thanks to smooth-running castors with parking brake
Double suction connection - either 2 x Ø50mm at the rear or 1 x Ø50mm at the top
Powder-coated housing - protection class IP 55
Bottom-mounted turbine - low center of gravity
Exhaust air opening and electrical connections protected - Removable protective cover
Filter cyclone upgrade FEX 1000.1:
Rear-mounted, highly effective cyclone pre-separatorfor pre-separating larger quantities of Fine Dust/particles up to 3 µm - Increases filter service life and reduces consumable costs.
Particle discharge (up to 97%) takes place in the removable 10-liter dirt container, which can be emptied or replaced in a user-friendly and low-contamination manner.
Powerful welding and soldering fume extraction with configurable design
The new FEX 1000.1 extraction system impresses with its process-adaptable, compact design and low overall height, making it suitable for use as an under-counter unit. But not at the expense of performance :
The EC blower, which is designed for continuous operation, generates a large volume of air, ensuring the reliable capture of welding fumes, soldering fumes and airborne dust . The capture method can be configuredaccording to your requirements: extraction with up to two hoses, with connections either at the rear or at the top. In addition, extraction is possible directly at the point of origin using an extraction arm.
The 2-stage combination filter system with HEPA filter then ensures thorough, safe filtration . The user-friendly, low-contamination filter change is ensured by the application-oriented design with front-accessible filter chamber. Furthermore, the permanently installed cyclone separator ensures a longer filter service life and therefore lower consumables costs.
HEPA filter and cyclone separator for maximum filtration and safety
HEPA HEPA filters and adsorption filtersconsist of a sturdy MDF box with seal and are fully incinerable. Thanks to the separate design, you can configure your filter system to suit the application and replace it separately depending on the load.
As a storage filter, an empty frame can be configured according to your requirements with a wide range of suitable filter inserts. The W3-compliant version requires the use of an expanded metal filter as spark protection. (In combination with empty storage filter frame + filter insert + expanded metal filter).
Discover your individual combi filter system
All filter cassettes with a height of 146 mm can be combined with each other.
HEPA filter
H13/H14 Cassette
5.6 m² filter surface,
Height 146 mm with seal
Storage filter empty frame
Standard version:
F9 insert
Free internal height = 75 mm
Total height = 146 mm
Dissipative design:
F9 insertand expanded metal filter
Free internal height = 60 mm
Total height = 146 mm
Adsorption filter
Activated carbon cassette
approx. 6 kg AK,
Height 146 mm with seal
Combi filter cassette
H13/H14 (2.8 m² filter surface) and activated carbon (approx. 3 kg AK):
Height = 146 mm with seal
Suitable inserts for empty storage filter frames:
Expanded metal filter as spark guard, height 15 mm
G4 fleece mat, height 14 mm
G4-Z-Line 0.3 m² - cardboard frame, height 48 mm
G4-Z-Line 0.6 m² - cardboard frame height 96 mm
M5 filter 0.8 m² - cardboard frame, height 48 mm
F9 filter 2.2 m² - plastic profile, height 48 mm
User-friendly and low-contamination filter change
The combination filter system for welding and soldering fume extraction FEX 1000.1 makes it easy to change the filter thanks to the easily accessible filter chamber.
Cyclone separator for longer filter service life and lower consumables costs
The cyclone separator upgrade (074-2120) includes a highly effective cyclone pre-separator permanently installed at the rear, including a 10-liter dirt container. This ensures the pre-separation of larger quantities of Fine Dust/particles up to 3 µm and consequently protects the filters. This increases the filter service life and reduces consumable costs. Particle discharge (up to 97%) takes place in the removable 10-liter dirt container, which can be emptied or replaced in a user-friendly and low-contamination manner.
Filter cyclone upgrade FEX 1000.1:
Rear-mounted, highly effective cyclone pre-separatorfor pre-separating larger quantities of Fine Dust/particles up to 3 µm - Increases filter service life and reduces consumable costs.
Particle discharge (up to 97%) takes place in the removable 10-liter dirt container, which can be emptied or replaced in a user-friendly and low-contamination manner.
Areas of application
Battery cell production
Automotive
EX-protected extraction
Electronics industry
Fine dust extraction
Laser fume extraction
Food industry
Pharmaceuticals/ Chemistry
Polishing
Fume extraction
Sanding dust extraction
Welding/soldering fume extraction
Packaging industry
Optimized control technology - adaptable to your extraction process
Powerful extraction technology requires optimum control technology, which is why our new FEX series is equipped with configurable controls that can be adapted to your extraction process. Operated via a clear and intuitive control panel:
Operating status, faults and warnings can be recognized at a glance by LED fields.
Intuitive control panel
Stepless regulation of the suction power during operation
Clear display to show the operating status and messages
Control technology: An important safety factor for the extraction system
- Test routine for motor, buttons, LEDs and more ensures all-round functionality for maximum safety
- Comprehensive types of fault messages and filter status messages - with pictograms and error codes
- Error log for traceability - to provide the best possible service
- Filter fill level is displayed in real time - separately for each filter
- And much more...
The control technology can also be adapted to your needs
- Different user roles with different authorizations and individual passwords
- Real-time fill level display individually adjustable to your suction material - for maximum accuracy
- Individually adjustable run-on time to ensure the highest possible extraction rate
- Alarm configuration according to the relevance in your extraction process
- And much more...
Connection for on/off remote control
It can also be connected to your existing controllers or devices. An 8-pin socket provides the convenient option of implementing a remote on/off switch. In addition, the operating status and signals from fault messages can be forwarded potential-free or with 24 V.
Gas and particle sensor for even more safety during extraction
The gas and particle sensor upgrade completes the maximum safety and efficiency requirements for your extraction process.
- Reports filter breakage - can initiate immediate shutdown
- Sensitivity and much more configurable in the user menu
- Test function to ensure functionality
- And much more...
Experience the new benchmark in welding and soldering fume extraction
Configure your FEX or request your individual offer for your industry now – our team will be happy to advise you!